Description:
1. Feed granulator is widely used in large, medium and small aquaculture, grain feed processing plants, livestock farms, poultry farms, individual farmers and small and medium-sized farms, farmers or large, medium and small feed processing plants.
2. This machine can be used alone, and customers who need it can also match it with a straw cutter for better results.
Note:
1. Before using the machine, it is necessary to adjust the screw of the pressure roller to the appropriate position. The pressure roller and the pressure plate should be closely combined, and the three adjusting screws should be on the same horizontal plane.
2. Please fill the oil tank before using the machine. Do not idle the machine for more than 2 minutes.
3. Double-check the belt and the screws before operation.
4. Clean up the rest after use to prevent damage to the machine.
5. If the pressure roller cannot rotate normally, please tighten the screws that control the pressure roller first, and then try to power it on. If it still does not work, you can appropriately loosen the screws next to the pressure roller and then tighten them slightly again (without special tightening).
Precautions:
1. When using, it should be noted that there should be no foreign matter such as stones and ironblocks in the raw materials. After the pellet machine has been working continuously for morethan ten shifts, the pressure roller oil hole, the universal joint oil hole, and the linkage shaft oilhole need to be filled with high-temperature lubricating grease to make the pressure roller Goodworking performance and extended bearing life.
2. During granulation, it is strictly forbidden for the pressure roller to contact with the templateto run idly, and the continuous feeding can not be interrupted.At the same time, the pressureroller shaft nut is locked to avoid loosening and damaging the spindle keyway.
3. When granulating, there is no granulation, no discharge, the template should be removed, andafter opening one by one, some fiber feed can be added appropriately to restart the granulation.
4. Always check the tightness of the screws in each part of the machine. If there is oil leakage inthe gearbox, replace the oil seals in time, and check whether the bearings in the machine headare short of oil.
5. When the pellet machine is working, do not reach into the feeding port with your hands. Ifnecessary, use wooden sticks to help feed the pellets.
6. Before turning on the machine, it is necessary to add less material before turning on the machine. When shutting down, leave a small amount of feed in the machine to prevent the pressroller of the machine from contacting the template from idling.
7. If the machine is stuck in operation, stop it immediately, press the pressure roller until thebolt is flat, and then restart the machine.
8. Each time the work is completed, the adjusting pressure roller bolts must be loosened.
9. Iron or stones cannot be put into the griller.
10. Check the elasticity of the belt, and the bearing frequently. Add oil in time when it needs to.
Item Included: 239174
EQCOTWEA Animal Feed Pellet Mill Machine 8MM Pellet Fodder Press Pelletizer for Chicken 180-200KG/H 220V
-
This is a pellet feed milling mahcine with grinding disc of 8mm in diameter. The length of the feed can be adjusted. It is used for producing pellet feed for farm animals, such as chickens, pigs and cows etc.
-
The machine is made of steel with paint sprayed on the surface for long service life. Big size inlet and outlet for easy input and easy discharge. Wheels at the bottom for easy transport.
-
The feed processed by the machine is smooth and has moderate hardness and nutrition is retained perfectly.
-
Equipped with 3 pieces of compression rollers and one grinding disc which are made of high-quality steel. Through high temperature quenching, it becomes better in resistance to wear and high temperature.
-
We have different size of disc. 2mm, 3mm, 4mm, 5mm, 6mm, 8mm for you to choose.
