The P1-2X12 is a dual P1 12” vented enclosure with 500 Watts RMS power handling wired to a 2-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high density carpet, and features quick release compression terminals. The most convenient way to get low frequency bass in your system is to drop-in a Punch Loaded enclosure. We’re not talking junk in the trunk, we’re talking the same genuine Punch woofers available separately. Punch Loaded enclosures are constructed with durable 5/8″ MDF and tuned by our computer aided design software. P1 Loaded Enclosures feature similar tonal performance as P2/P3 models, but are easier to move in-n-out of vehicles due to their lighter weight.
Features:
Constructed with 5/8″ MDF
Proprietary high-flow, low-noise port
High current binding posts
Specifications:
Woofer Quantity: 2
Nominal Impedance (ea): 2-Ohm, Internally wired to create a 2-Ohm amplifier load
Power Handling (Watts RMS): 500 Watts RMS, 1000 Watts Max
Enclosure Material: 5/8″ MDF (Medium Density Fiberboard)
Dimensions: 15.125″ x 33.875″ x 15.75″ (38.4cm x 86cm x 40cm)
Woofer Size: 12″
Enclosure Type: Vented
Speaker Connector: Up to 10 AWG compression terminals
Shipping Weight: 70.9 Lbs. (32.15 kg)
- The P1-2X12 is a dual P1 12” SVC subwoofer in a vented enclosure that reproduces low bass frequencies accurately with high output SPL (Sound Pressure Level)
- The P1-2X12 vented loaded enclosure is Internally wired to create a 2-Ohm amplifier load with power handling of 500 Watts RMS / 1000 Watts Max
- Punch Loaded enclosures are constructed with durable 5/8″ MDF material and feature a proprietary high-flow, low-noise port with high current binding posts for maximum signal flow to the speakers inside
- The P1-2X12 loaded enclosure measures at 15.125″ x 33.875″ x 15.75″ (HxWxD)
- Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller
- Speaker Connector: Up to 10 AWG compression terminals
- Tear and fatigue resistant poly cotton spider
- High temperature 2″ 4 layer voice coil with spun laced Nomex insulating reinforcement collar
- Optimized motor magnetics with extended pole piece and bumped backplate
- Fatigue resistant and reduced strain stitched on flexible lead wire design
- Multi point high temperature/high strength neck joint bonding
- High quality 16 gauge compound bend frame geometry
- Semi flexible PVC removable protective motor cover
- Proprietary spider venting/cooling
- Decorative ABS trim ring
- Enclosure Material: 5/8″ MDF (Medium Density Fiberboard)
- Frequency Response: 25 250 Hz
- Sensitivity: 86 dB
- CEA 2031 Compliant
- Condition: Brand New!
- Item Weight: 69.85 lbs.
- Part Number: **P1 2X12**
- 1 Year Manufacturer Warranty
