NVX BE-TOYHIG3-VS102 Car Subwoofer Bass Package 2014-2019 Toyota Highlander 10″ 500W RMS 41.63 lbs

$94.84

Description

Our new BOOST enclosures were painstakingly designed by our in-house engineers to combat the lack of rich and deep bass commonly associated with the factory sound system. Whether you have a Tesla Model S or a Chevrolet Corvette C6 Coupe, you will get to experience bigger and better bass. Each of our enclosures come equipped with NVX’s top of the line subwoofers, so you know your enclosure will bring the noise. The NVX BOOST subwoofer enclosures work with what you already have in your car, especially with an aftermarket stereo. Weight: 41.63 lbs.

  • Product Highlights
    • Custom Bass Enclosure for 2014-2019 Toyota Highlander vehicles
    • Powerful NVX VS102v2 Subwoofer
    • Hand-Laid Fiberglass Enclosure
    • Fits In the Storage Cubby On the Left Side of the Trunk
    • Add 500 Watts RMS of Bass to Your Toyota
  • 2014-2019 Toyota Highlander – 10″ Subwoofer Enclosure | NVX BE-TOYHIG3-VS102 Includes 10″ 500W RMS Subwoofer, Custom Box & Mounting Hardware Product Details:
    • Custom designed bass enclosure for 2014-2019 Toyota Highlander vehicles
    • Hand-laid fiberglass shell
    • Installs quickly and easily into the storage cubby on the left side of the trunk
    • 10″ Dual 4 Ohm VS Series Subwoofer
    • Power Handling:
    • RMS: 500 Watts
    • Peak: 1500 Watts
    • Impedance: Dual 4 ohms
    • Pressed paper cone with woven fiber top
    • Woofer surround type
    • Custom high roll foam surround with nylon stitching
    • 2.5″ high temperature aluminum voice coil
    • 127oz. triple stacked ferrite magnet motor structure with protective rubber boot
    • Frequency response: 20-220 Hz
    • Sensitivity: 87dB
    • Complete amplified bass system package available here
    • Authorized Internet Dealer
    • 1-year Manufacturer’s Warranty
  • NVX VADM1 500W RMS Class D Monoblock Car/Marine/Powersports Amplifier with Bass Remote Product Details:
    • Marine Certified 1-Channel Class D Car Amplifier
    • Peak Power Rating: 1000 Watts
    • RMS Power Rating:
    • 4 ohms: 180 watts x 1 channel
    • 2 ohms: 320 watts x 1 channel
    • 1 ohm: 500 watts x 1 channel
    • Cutting edge Micro Class D technology allows amplifier to be extremely compact
    • LED power (blue) and protect (red) indicators
    • Conformal Coated Marine grade circuit board
    • Balanced Differential Inputs, to eliminate noise picked up by signal cables
    • Speaker-level (high-level) inputs
    • 3-way protection circuitry (thermal, overload, and speaker short protection)
    • Input sensitivity: 0.2V-5V
    • Variable low-pass filter (50-250 Hz)
    • Bass Boost: 0 – +18dB boost @ 45Hz
    • Frequency Range : 20 – 20KHz
    • Total Harmonic Distortion: <0.3%
    • CEA-2006 compliant amplifier
    • Dimensions: 6.8″L x 3.3″W x 1.5″H
    • Authorized Internet Dealer
    • 1-year Manufacturer’s Warranty
  • NVX XLCA2X PRO 2-Channel Line Out Converter Digital Bass Enhancer with xBOOST, Impedance Matching, and Remote Level Control Product Details:
    • Active 2-channel line output converter and line driver
    • Designed to work with factory and aftermarket audio systems
    • Speaker-level inputs handle up to 30V (225 watts RMS)
    • Low-level RCA inputs handle 150 mV – 2 Volts
    • RCA outputs Provides up to 9.5 Volts of output
    • Adjustable xBOOST corrects for bass roll-off
    • Auto turn-on via DC offset or Audio detection
    • Load selection switch (20, 60, or 20K ohms) to prevent factory stereo shut-down
    • 12 Volt turn-on output for aftermarket amplifiers
    • Selectable Ground Isolation switch to eliminate ground and alternator noise
    • Molex terminals for speaker signal and power
    • Wired remote bass level control included
    • LED Clip indicator
    • Total Harmonic Distortion: 0.001%
    • Signal to Noise: >105 dB
    • Frequency Response: 10-25,000 Hz
    • Authorized Internet Dealer
    • 1-year Manufacturer’s Warranty
  • NVX XKIT82 Full Spec 8 Gauge 100% (OFC) Oxygen Free Copper Complete 2-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 800 Watts Product Details:
    • 8 Gauge 2-Channel X-Series Complete Amplifier Installation Kit
    • Designed for car audio systems up to 800 watts RMS
    • Made from 100% (OFC) Oxygen-Free Copper for pure uninterrupted power and current transfer
    • Tinned conductors for corrosion resistance
    • Pre-installed black nylon mesh covering protects power wire from being damaged
    • Solid Brass and Satin Chromed ANL/Mini-ANL Fuse holder offers ideal protection for high powered systems
    • Pre-terminated seamless power and ground ring terminals provide reliable performance
    • Full Spec cables meet or exceed the American Wire Gauge standards
    • Strand Count: 735
    • CEA-2015 and BC5W2 Compliant
    • Authorized Internet Dealer
    • 1-year Manufacturer’s Warranty
  • Kit includes:
    1. 20 ft. (6.1 meters) Frosted Blue 8 gauge power wire with seamless crimp ring terminal
    2. 3 ft. (.91 meters) Frosted Black 8 gauge ground wire with seamless crimp ring terminal
    3. 20 ft. (6.1 meters) Clear 18 gauge remote lead wire
    4. 40 ft. (12.2 meters) Frosted Black/Blue 16 gauge speaker wire
    5. One 16 ft. (5 meters) 2-channel dual twisted construction RCA interconnect Cable (NVX XIV25)
    6. One NVX XMANL04 ANL/Mini-ANL Fuse Holder with 60 amp Mini-ANL fuse
    7. One Black rubber firewall grommet
    8. Two 4 Gauge Nickel Plated spade terminals
    9. Four 18 Gauge Spade terminal
    10. Two 18 Gauge Red butt connectors
    11. Four 16 Gauge quick disconnect
    12. Five 16 Gauge Nickel Plated spade terminals
    13. Ten 6″ Black zip ties