Product Information: These two piece conversion type wheel adapters are used to convert 5 lug 5.5-inch (139.7mm) bolt pattern hub to fit wheels of 6 lug 5.5″ (139.7mm) pattern. Adapters are built with 78mm hub centric lip. If your wheels have 78mm bore, they will be centered on the lip for a factory fit. They will space out your wheels for 2-inch. Check to make sure you have enough clearance. CNC machined with precision craftsmanship using 6061 T6 aerospace quality billet, featured in high load capacity and corrosion resistance. Sold as a set of 4 for all four wheels. Hub centric design for a snug fit for factory wheels listed below. Significantly reduces stress on bearings and chance of vibrations. Fit on 5×4.75 Pattern Hub or Fit the Following Vehicles: Dodge: Dakota (05-11), Durango (04-10), Ram 1500 New Body 2/4WD (94-on), Ramcharger (79-83), 1/2 & 3/4 Ton Truck (79-93), Ram Van (85-96) Ford: Bronco (66-on), F 1/2 ton F-100, 150 (54-96), 1/2 Ton E-100, 150 Van (70-96) Hub Centric Fit for Factory Wheels (or 78mm Bore wheels) Compatible with Following Vehicles: All Chevy/GMC 6×5.5 bolt pattern (92-on, excluding Colorado, Canyon), Cadillac Escalade, Nissan Titan **Even if your 6×5.5 bolt pattern wheels have a different bore, the adapters are still going to work and it is possible to get a snug fit by using a different set of hub centric rings. Adapter Specification: Vehicle Bolt Pattern: 5×5.5-inch (139.7mm) Wheel Bolt Pattern: 6×5.5-inch (139.7mm) Studs Thread Size: 14×1.5 Hub Bore Size: 74mm Hub Centric Lip: 78mm Thickness: 2-inch (50mm) Lug Torque: 95 ft-lbs Black Allen Bolt Torque: 55 ft-lbs Technical Notes: If hub studs protrude outside the inner adapter piece and prevent the outer adapter piece from sitting flush, it is required to shorten the factory studs.
- 【Purpose】Convert from 5 lug vehicle to 6 lug wheel, meaning putting 6 lug wheels on 5 lug vehicle
- 【Fit Vehicle】Fit vehicles of 5×5.5″ or 5×139.7mm bolt pattern. Your Garage filter is to confirm fitting of your vehicle only, not for the wheels.
- 【Convert Wheel】Convert to wheel must be 6×5.5″ or 6×139.7mm bolt pattern. Sold by 2 pairs (4 adapters)
- 【Quality Assurance】Aircraft quality TRUE forged 6061 T6 lightweight billet. CNC machined with precision craftsmanship. Features in high load capacity and keep stock ride. Anodized for corrosion resistance. Heat-treated 10.9 grade steel studs.
- 【Attention】14×1.5 studs; 2″ (50mm) thickness; 108mm center bore; Adapters will give you widened stance as well as more stability. If vehicle studs protrude outside the inner piece adapter, you will need to shave down vehicle studs.
- 【Mounting Lug Nuts】Open end mounting lug nuts not included