Gas Type: LPG Liquid Petroleum Gas (PROPANE)
Capacity: 8L/min (2Gal), 25 degrees warm water producing rate
Working temperature:-8-45℃
Thermal input: 16KW
8L Maximum air consumption: 1.0kg/h
Thermal efficiency: ≥80.8%
Temperature rise: 25℃
Minimum working water pressure: 0.025MPa
Gas pressure: 2800Pa/ 0.40psi (Very important to set appropriate gas pressure, or the water heater will not ignite.)
Gas pipe: G 1/2″
Water Inlet: G1/2″
Water Outlet: G1/2″
NPT 1/2″ female to G 1/2″ male
We have adapters which can convert G thread connector to NPT connector (not include in the list). If you need, please contact us.
Vent Type:4.3″ Flue Duct
Panel Color: White
Certification: ISO 9001:2000
Automatic ignition system, Flame failure protection device
Water & gas combination unit ,Fitted with over heating and pressure safeguard
Suitable for both summer and winter
20 min. off self-timer
Mains power not required
Electrical requirement: DC3V, Automatic electric ignition powered by two (2) size ‘D’ batteries (batteries not included; No electrical hook up; No standing pilot)
Net weight: 17 Lbs
Attention:
Empty the water tank in cold weather to avoid any crack
Do not install the water heater and the exhaust pipe near any flammable or explosive items.
Please seal the air inlet, water inlet and water outlet with the attached gasket, do not use raw material tape / PTFE tape to seal, otherwise it will cause air leakage and water leakage.
- High efficient energy saving with advanced energy-saving and combustion technology to decrease gas consumption and burning noise
- Low water-pressured startup allows operation in low water pressure areas and high-rise buildings
- Manifold auto protection for safety with ion flame inspection to automatically shut down gas power during unexpected flameout
- Over water pressure protection function to automatically decrease pressure under excessive high water pressure
- Controller design enables proper control of both cold and warm water
