Support Full 10 Engine System Functions Plus Battery Test
✔️Battery Test: Provides quick and accurate testing of most types of 12V batteries, including regular flooded, AGM flat plate, AGM spiral and gel, Tests batteries rated from 100 to 1100CCA, Tests multiple rating systems – CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE.
✔️Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)
✔️Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.
✔️Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
✔️I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
✔️Read Live Data Stream:Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
✔️View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
✔️O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.
✔️On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.
✔️Read Vehicle Information:Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
✔️Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.
Enhanced OBD II functions
🚩LED Notifications: Red-Yellow-Green LEDs and build-in speaker indicate the readiness status for smog check. This engine diagnostic tool can also help catch intermittent problems or confirm repairs during a drive cycle.
🚩Data Log: The NT301 auto code reader records PIDs for later use to help you diagnose intermittent driving performance problems which can not be determined by any other methods.
🚩DTC Help: Press “HELP” button with DTC guide for possible causes if codes show the small “?” icon.
🚩VIN Retrival: Automatic VIN acquisition and decoding make it much easier to read manufacturer specific codes and enhanced mode 6 data.
🚩Print Data: If you are unable to determine the problem, you can print out the diagnostic data and send the data to your mechanic for help.
🔧FOXWELL NT301 Plus OBD2 Scanner Specification:
– Display: 2.8” TFT color screen
– Operating Temperature: 0 to 60°C (32 to 140°F)
– Storage Temperature: -20 to 70°C (-4 to 158°F)
– Power: 8 to 18 V provided via vehicle
– Supported Protocols: J1859-41.6, J1850-10.4, ISO9141, KWP2000 (ISO 14230), and CAN (Control Area Network ISO 11898)
– Dimensions: 145*94*32mm
– Weight: 0.6KG
📦Package Including:
1pc x NT301Plus Main Unit
1pc x USB Cable
1pc x Battery test clips
1pc x Quick Start Guide
1pc x Warranty Card
- ✅【Powerful OBDII Scanner】The 2 In 1 NT301 Plus is a professional hand-held diagnostic scanner, fits for mechanics, dealership, DIYers, or individual users, providing easiest and cost-effective solution for OBD faults and battery status check. Its one click I/M readiness test, and reading/clearing DTCs streamline automotive service and help ensure rapid, accurate diagnosis and timely repair.
- ✅【Enhanced Battery Checking】It comes with a “BATTERY CLAMP CABLE” that code reader can read battery voltage, analyze battery healthy status, view charging status and detect faults and bad cells. Check battery condition of 12V 100-1100 CCA regular flooded, AGM flat plate, AGM spiral, as well as GEL batteries, and give you an accurate test result display in 3 seconds.
- ✅【Free Extension Cable????Easy to Use】We offer a free Foxwell obd2 extension cable to encourage everyone to try this foxwell scanner. Just add it to your cart, and it will minus the difference automatically counting. In additional, NT301 Plus obd2 scanner comes with latest software, which can be used out of box. Plug and play. No need to waste time to download the software first.
- ✅【One-Click I/M Readiness????Wide Compatibility】Features with 2.8” TFT color screen and the unique One-clcik I/M Readiness key can get emission readiness status, trouble codes with just one single click. Compatible with 12V Standard OBD2 Cars from 1996(in USA) to now, including compliant cars, light-duty trucks, SUVs, minivans and hybrid(the vehicles of American, European, France, Japanese, and Chinese).
- ✅【DTC Lookup ???? “HELP” Repair Assistance】The built-in DTC library with 10W+ detailed definition helps you understand the specific engine faults. In addition, we not only support the definition and query of fault codes, but also support the fault code maintenance help function. This function provides some maintenance guidance for some specific faults.
- ✅【Multilingual????Lifetime Free Update ????After-sales Support】The obd2 scanner provides multilingual, for instance, English, Spanish, German, Italian, French, Portuguese, Russian, Dutch, Japaness and so on. We offer lifetime after-sales support for this automotive scanner, any queries of this obd2 scanner, 7*24 hours technical support. Return and refund is also allowed if the scan tool didn’t meet your expectations or you just feel not happy.
