Add a striking element of moving water to your pond using the Little Giant F-Series Wet Rotor Pump. This truly versatile pump offers a wealth of installation options, to create a remarkable water feature. The efficient, wet rotor design is ideal for continuous use, and a large, dual screened inlet accommodates a significant amount of water while protecting the motor from debris. Remove the screw at the base of the screens and release the green snaps to fully remove them for cleaning or inline installation. The thermally protected design turns off the pump if it gets too hot, and the item is void of oil for the safety of your fish and plants. Its canned motor technology enables the unit to be placed both inline or submerged, and situated either horizontally or vertically. The 6″ wide, plastic base creates a stable stand for horizontal placement, and a molded, plastic loop on the back aids in vertical installation. Connect a 2″ female fitting (not included) to the threaded top outlet to accommodate your tubing. The non-corrosive plastic housing, low profile, and versatile design make this pump perfect for your large to extra large falls or statues. Efficiently keep the water in your pond moving with this F-Series Wet Rotor Pump. Two year limited warranty.
Pump Performance
Use this chart to determine the proper size pump for your pond. The height of the water outlet above the surface of the pond is called the Head Height. Gallons Per Hour (GPH) represents the maximum amount of water your pump is capable of pushing at a given Head Height. To ensure the pump’s best possible performance, reduce frictional losses by using the largest diameter hose possible.
| Head Height (in feet) | Gallons per Hour |
| 0′ | 5540 |
| 1′ | 5256 |
| 5′ | 4233 |
| 10′ | 2894 |
| 15′ | 1956 |
| 20′ | 416 |
| 21.3′ | shutoff |
Model Number: F40-5500
Dimensions: 13.5″L x 6″W x 8.125″H, 20’L cord
Pump Inlet: screened inlet, or accepts 2″ FNPT fittings
Pump Outlet: accepts 2″ FNPT fittings
Maximum Head: 21.3′ shutoff
Maximum Flow: 5540 gph
Power: 360 Watts
Voltage: single phase, 120V
Mfg. Warranty: 2 year limited warranty
- APPLICATIONS: wet rotor pump construction without mechanical seal or oil is ideal for ponds up to 5500 gallons; 2-inch MNPT and SPIG discharge
- 2 PRE-SCREENS INCLUDED: removable fastener holds screen in place, modular design allows for single or multiple pre-screens
- VERSATILE: can be positioned vertically or horizontally; can be used submerged or in-line; accepts 2-inch threaded fitting or rubber coupling
- SAFE FOR FISH: oil-free design for maximum safety for all pond life
- SPECIFICATIONS: 3.0 Amps, 360 Watts, 20-ft. cord, 2-inch MNPT and SPIG discharge and inlet, maximum 5540 GPH at 0′, 21.3-ft. shut-off, comes with rope/cable loop
