Melt Flow Index Rate Tester MFR Tester Indexer Flow Rate Meter PEPP Particle Melt Finger Tester with Digital Display 110V

$94.17

Description

Descriptions:
This Melt Flow Index Tester is complied with GB/T3682-2000, ASTM D1238-98 standards, and refer to JB/T5456, ISO1133 ect. similar standards.
It is widely used in plastics raw materials products, the petrochemical industry and related universities, scientific research institutes, and commodity inspection departments.
It is used to determine melt-mass flow rate (MFR).
It is applicable not only to the higher melting temperature, such as polycarbonate, nylon, Fluor plastics, poly oxide and other engineering plastics.
It also applies to plastic measurement of melt lower temperature, such as polyethylene, polystyrene, polypropylene, ABS resin, polyformaldehyde resin.

Parameters:
Temperature Range: Room Temperature – 450℃
Temperature Control Resolution: 0.1℃
Timing Resolution: 0.01S
Loading: 10KG (0.325kg;0.875kg;0.96kg;1.2kg;1.64kg;5kg)
Testing methods: quality law
Scraping way: Manual and Automatic
Power: 500W
Testing range: 0.1-200g/10min
Temperature Recovery: Less than 3 min
More info pls contact us.

Item include: 025030
110V Melt Flow Index Rate Tester MFR Tester*1

  • Widely used in plastics raw materials products, the petrochemical industry and related universities, scientific research institutes, and commodity.
  • The machine uses high-performance, high-precision control instruments, the use of PID regulation for temperature control, with high sampling accuracy, fast control characteristics.
  • The panel is equipped with a time controller, temperature control table, total power switch, heating switch, automatic cutting switch and manual cutting button.
  • This instrument is used to measure the melting of various polymers in the state of viscous flow.It is suitable for polycarbonate, polyarylene sulfone, and fluoroplastics with high melting temperature.Also suitable for polyethylene, polystyrene, resin and other plastics with lower melting temperature.
  • The melt flow rate refers to the quality or volume of the thermoplastic die at a given temperature and load, the melt passes through the standard die every 10 minutes.