Includes:
Subwoofer
Remote
Installation mounting bracket
Hardware connection screws
Manual
Description:
The Rockville Ground Pounder is what we believe to be the loudest powered car subwoofer on the market. In addition, it is fully loaded with all the best features.
Power that will shake the ground!
The Ground Pounder is extremely powerful! It puts out 800 watts peak and 200 watts RMS! But more importantly then the watts is the high efficiency woofer. This Subwoofer system is engineered for high SPL output. Although very musical at lower volumes, at higher volumes this system will be vibrating your mirrors with bass you can truly feel.
A full edge surround is used on the subwoofer integrating it into the enclosure so there is no wasted space. This leads to more cone space and thicker surrounds resulting in more excursion and higher SPL! The enclosure has 2 x 10.5” woofers built in. One main woofer and one passive radiator. The woofer has a 2” voice coil and a 55 Oz magnet.
Integrated Amplifier
The subwoofer enclosure has a built-in integrated class A/B amplifier. Class A/B gives the purest sound quality when compared with class “D” or any other type of amplifier.
Bolt-down mounting system with quick-disconnect
Included in the box is all the mounting hardware and screws you will need so you can bolt down and secure the subwoofer into your trunk. The quick disconnect system allows the subwoofer to easily disconnect from the mounting kit if trunk space is needed.
Compact Die-cast aluminum enclosure:
This is one of the only subwoofers on the market that comes pre-mounted into an aluminum enclosure! The aluminum enclosure makes this system extremely durable. The compact size compared to the power this system delivers is truly a game changer. Now you don’t need to sacrifice as much trunk space in order to deliver ground shaking bass!
Easy to integrate:
We included standard low-level RCA inputs for use with an aftermarket car stereo that has RCA outputs. We also included high level speaker inputs allowing you to integrate with a stock stereo that does not have any RCA outputs.
Tons of controls!
Features:
Rockville Ground Pounder 800w Powered Dual 10″ Car Subwoofer in Aluminum Enclosure
Size: Dual 10.5” woofers
Peak Power: 800 Watts
RMS Power: 200 Watts
Die-Casting Aluminum Housing
10.5” Subwoofer
10.5”Passive Radiator Subwoofer
Single 2 Ohm
2” CCAW Voice Coil
Foam Surround
Full edge surround gives more surface area to support more excursion and higher SPL
Subwoofer is integrated into the enclosure rather than being 2 separate units. This is engineered to give you ground pounding bass
Includes an easy to install bolt-down mounting kit
Polypropylene Cone
Polypropylene Dust Cap
Matte Black Custom Molded Metal Grille
55 oz Ferrite Magnet
Class AB Amplifier Produces Amazing Sound Quality
High Speed MOSFET Power Supply
Low Level &High Level Inputs
Auto turn on (on/off selectable)
Input mode: Select either Low level RCA inputs or High speaker level inputs
Easily detaches from the mounting kit if you need extra cargo space
Phase switch: 0 to 180 degrees
Gain control: 100mV to 4V with line input and 250mV to 10V with speaker level input
Bass equalizer: from 0 to +12 dB (centered at 50 Hz)
Adjustable crossover frequency: (variable from 50 Hz to 150 Hz @ 12 dB/octave)
Frequency Response: 30Hz – 150Hz
Sensitivity: 93dB @1W 1M
THD: < 1%
Signal To Noise Ratio: >90dB
I
Rockville Ground Pounder 800w Dual 10.5″ Car Subwoofer in Aluminum Enclosure
- Dual 10.5” woofers for powerful bass output
- Peak power of 800 watts and RMS power of 200 watts
- Integrated class A/B amplifier for superior sound quality
- Compact die-cast aluminum enclosure for durability and reduced trunk space usage
- Full edge surround design for increased cone area and higher SPL
- Bolt-down mounting system with quick-disconnect feature for easy installation
- Low-level RCA inputs for aftermarket stereos and high-level speaker inputs for stock stereos
- Adjustable crossover frequency from 50 Hz to 150 Hz
- Bass equalizer with settings from 0 to +12 dB centered at 50 Hz
- Phase switch adjustable from 0 to 180 degrees
- Gain control ranging from 100mV to 4V with line input and 250mV to 10V with speaker level input
- Frequency response of 30Hz – 150Hz for deep bass performance
- Sensitivity rating of 93dB @1W 1M for efficient sound output
- Total harmonic distortion (THD) of less than 1% for clear audio
- Signal-to-noise ratio greater than 90dB for minimal background noise
