Videos of RXM-S30:
Features:
- Rockville RXM-S30 2400w / 600w Dyno-Certified RMS 4 Channel Proton Micro Marine Car Amplifier
- Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
- 400 Watts (4 x 90 Watts) at 4 ohms and 1% THD+N
- 600 Watts (4 x 150 Watts) at 2 ohms < 1% THD
- 600 Watts (2 x 300 Watts) bridged @ 4 Ohms < 1% THD
- Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc):
- 2400 Watts (2 x 1200 @ 2 ohms or 1 x 2400 @ 4 Ohms)
- Marine amplifier with conformal coated PCB board
- High-Speed MOSFET Power Supply
- Studio-Grade Bipolar Output Stage Transistors
- Double Sided Surface Mount (SMD) PCB Design
- Selectable +6dB/+12dB Bass Equalizer @ 45hz
- Channel Separation: 50 dB
- Current drawn @ MAX RMS output: 27A @ 4ohm, 40A @ 2ohm
- Efficiency @ MAX RMS output: 65% @ 4ohm, 60% @ 2ohm
- 2-Ohm Stable Stereo
- 4-Ohm Mono Bridgeable
- 3 Channel Mixed-Mono Capable
- Input sensitivity: 20mV-6V
- Mute and Delay Soft Start System
- Full IC-Controlled Protection Circuitry
- 2 CH / 4 CH Input Mode Switch
- RCA Preamp Line Output
- 8 Volt Preamp Circuitry
- Status Mode LED Indicator
- 4 Gauge Lucite Encapsulated Power/Ground Terminals
- 12 Gauge Lucite Encapsulated Speaker Terminals
- THD+A: 0.01%
- Frequency Response: 15Hz – 20KHz
- Continuously Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
- Continuously Fully Adjustable High Pass Crossover: 50HZ – 250HZ
- CH1 & CH2 High Pass 50Hz – 250Hz
- CH3 & CH4 Low Pass 50Hz – 250Hz
- CH3 & CH4 High Pass 50Hz – 250Hz
- Full Adjustable Crossover Controls: low pass, high pass, and full pass
- Sensitivity: 100dB @ 1w / 1m
- S/N Ratio: >90dB
- &l
- Rockville RxM-S30 2400w / 600w Dyno-Certified RMS 4 Channel Proton Micro Marine Car Amplifier.
- Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 400 Watts (4 x 90 Watts) at 4 ohms and 1% THD+N. 600 Watts (4 x 150 Watts) at 2 ohms < 1% THD. 600 Watts (2 x 300 Watts) bridged @ 4 Ohms < 1% THD. Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc): 2400 Watts (2 x 1200 @ 2 ohms or 1 x 2400 @ 4 Ohms).
- Marine amplifier with conformal coated PCB board. High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. Double Sided Surface Mount (SMD) PCB Design. Selectable +6dB/+12dB Bass Equalizer @ 45hz. Channel Separation: 50 dB. Current drawn @ MAx RMS output: 27A @ 4ohm, 40A @ 2ohm. Efficiency @ MAx RMS output: 65% @ 4ohm, 60% @ 2ohm. 2-Ohm Stable Stereo. 4-Ohm Mono Bridgeable. 3 Channel Mixed-Mono Capable.
- Input sensitivity: 20mV-6V. Mute and Delay Soft Start System. Full IC-Controlled Protection Circuitry. 2 CH / 4 CH Input Mode Switch. RCA Preamp Line Output. 8 Volt Preamp Circuitry. Status Mode LED Indicator. 4 Gauge Lucite Encapsulated Power/Ground Terminals. 12 Gauge Lucite Encapsulated Speaker Terminals. THD+A: 0.01%. Frequency Response: 15Hz – 20KHz. Continuously Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Continuously Fully Adjustable
- High Pass Crossover: 50HZ – 250HZ. CH1 & CH2 High Pass 50Hz – 250Hz. CH3 & CH4 Low Pass 50Hz – 250Hz. CH3 & CH4 High Pass 50Hz – 250Hz. Full Adjustable Crossover Controls: low pass, high pass, and full pass. Sensitivity: 100dB @ 1w / 1m. S/N Ratio: >90dB. Damping Factor: > 200 @ 100Hz. 2 x 30A Fuses. 7 LBS. Dimensions: (W x H x L) 6.7″ x 1.98″ x 12.28″
