Note：The ground polishing machine cannot polish the ground where glue exists.
✔Description:
1. This orange ground grinder runs on 220V power.
2. 2.2kw copper motor and high-speed bearings，featuring simple operation and easy maintenance.
3. The machine body is made of steel and sprayed with paint on the surface.Durable and with goodling looking.
4. Round strong magnetic grinding head is used for ground grinding, and resin grinding disc is used for polishing.
Note：Give away 5 meters of wires. The maximum length of the machine can be connected to 90 meters of wires. The specification is three-core wires. Each wire should not be less than 6 mm ² of pure copper wire. The wire must be connected to the air switch, and the rated current of the air switch is about 63A. As shown in the picture of wiring mode, please contact us if you have any questions.
✔Parameter:
Voltage: 220V
Working width: 280mm
Number of grinding head: 3 PCS
Motor power: 2.2KW
Speed: 1430 RPM
Weight: 77 kg
Work Depth：0-3mm
✔Features:
1. The pure copper motor is of high quality and the product is sturdy and durable. The new statorand rotor of the motor can easily realize the conversion of electrical energy and mechanical energy.
2.Round strong magnetic grinding head, hard, wear-resistant, work efficiency and high quality.
3.High performance, stable life, long service life.
4.Highly adaptable cement floors can also be fully hardened and work can be done at the root of the wall,adjustable position of chassis.
5.Power cord without plug.
✔Precautions For Use:
1. The input voltage should not be too low.
2. When using, first lift the machine head off the ground,and then turn on the switch. When the machine head rotates normally, gently place it on the ground.
3. When working, the machine head swings left and right, then moves forward, and cannot stop in place.
4. In case of power failure during operation, the switch should be reset and cannot be stopped at the original position to avoid burning the motor when the power is on.
5.If a generator is used to provide power, the output power of the generator must be at least 7KW.
✔Item Included:239208
TECHTONGDA Floor Grinding and Trimming Machine Concrete Floor Grinder Polisher Machine Heavy Duty Hand-Push Concrete Grinding Machine 220V
- 【Powerful Steel Machine Body】The machine body is made of steel and sprayed with paint on the surface, durable and with goodling looking.
- 【High Efficiency】The pure copper motor is of high quality and the product is sturdy and durable. 2.2kw copper motor and high-speed bearings, featuring simple operation and easy maintenance.
- 【Excellent Design】The handle adopts ergonomic design and wrapped with rubber non-slip sleeve，wear-resistant, make the construction easier. The machine has two holes to adjust the height of the handle. It also has wheels for easy transportation.
- 【Meet Your Different Needs】The concrete floor grinder is with triangle disc and sticky disc, and the sticky disc with resin grinding disc, can be used to polish the terrazzo floor. can be replaced freely according to the construction site.Diamond chassis is sharp, hard, wear-resistant, Good sanding effect and high quality.
- 【Wide Application Range】Widely used in a concrete countertop, stone countertop, floor surface, marble, ceramic tile, etc, suitable for the restoration of the flatness of the new ground, roughening the surface, and refurbishing the old epoxy and so on.
